Recording a cd by specifying track order, Program edit, Recording a cd by specifying track – Sony MHC-GRX66 User Manual
Page 26: Order
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recording a CD by
specifying track order
— Program Edit
You can record tracks from all the CDs in the
order you want. When programming, make
sure the playing times for each side do not
exceed the length of one side of the tape.
l/(!)
»
(Power) ^
112
11,
EDIT
3
5
6
1 10
8
CHECK
1
Place a CD and insert a blank tape
into deck B.
2
Press FUNCTION repeatedly until
"CD" appears in the display.
3
Press PLAY MODE repeatedly until
"PROGRAM" appears in the
display.
4
Press one of the DISC 1~3 buttons to
select a CD.
5
Turn the jog dial until the desired
track appears in the display.
Total playing time
Disc number (including selected track)
J-
“if
L U L
rr / n ■ /1
f-
u
J
Track number
6
Press ENTER/NEXT.
The track is programmed. The program
step number appears, followed by the
total playing time.
7
To program additional tracks to be
recorded on side A, repeat steps 4 to
6
.
Skip step 4 to select tracks from the same
disc.
8
Press II on the remote to insert a
pause at the end of side A.
"P" appears in the display and the total
plying time resets to "0.00" in the
display.
26