Ïïusurround, Safety, Installing – Sony KP-6lHS20 User Manual

Page 3: Attention, Owner’s record

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Safety

Operate the projection TV only on 120 V AC.

The plug is designed, for safety purposes, to fit into

the wall outlet only one way. If you are unable to
insert the plug fully into the outlet, contact your

dealer.

If any liquid or solid object should fall inside the

cabinet, unplug the projection TV immediately and

have it checked by qualified service personnel
before operating it further.

If you will not be using the projection TV for several

days, disconnect the power by pulling the plug itself.
Never pull on the cord.

For details concerning safety precautions, see

“Important Safeguards” on page 4,

Installing

To prevent internal heat buildup, do not block the
ventilation openings.

Do not install the projection TV in a hot or humid
place, or in a place subject to excessive dust or

mechanical vibration.

Avoid operating the projection TV at temperature

below 5 °C (41°F).

If the projection TV is transported directly from a
cold to a warm location, or if the room temperature
changes suddenly, the picture may be blurred or

show poor color. In this case, please wait a few hours
to let the moisture evaporate before turning on the
projection TV.

To obtain the best picture, do not expose the screen

to direct illumination or direct sunlight. It is
recommended to use spot lighting directed down

from the ceiling or to cover the windows that face

the screen with opaque drapery. It is desirable to

install the projection TV in a room where the floor
and walls are not of a reflective material.

As an ENERGY STAR®

Partner, Sony Corporation has

determined that this product
meets the ENERGY STAR®

guidelines for energy efficiency.

Note on convergence adjustment

Before you use your projection TV, make sure to adjust

convergence. For details, see “Adjusting the Convergence

Automatically - FLASH FOCUS

tm

on page 33.

ïïuSurround;

with

SRSC#J

TruSurround is a trademark of

SRS Labs, Inc. SRS and the SRS
symbol are registered trademarks

of SRS Labs, Inc. in the United States and selected

foreign countries. SRS and TruSurround are incorporated
under license from SRS Labs, Inc. and is protected under
United States Patent Nos. 4,748,669 and 4, 841, 572 with
numerous additional issued and pending foreign patents.

Purchase of this product does not convey the right to sell
recordings made with the TruSurround technology.

BBE and BBE Symbol are trademarks of BBE Sound,
Inc. and are licensed by BBE Sound, Inc. under U.S.

Patent No. 4,638,258 and 4,482,866.

ATTENTION

Pour prévenir les chocs électriques, ne pas utiliser cette

fiche polarisée avec un prolongateur, une prise de courant

ou une autre sortie de courant, sauf si les lames peuvent
tre insérées à fond sans en laisser aucune partie à

découvert.

Owner’s Record

The model and serial numbers are located at the rear of

the projection TV, below the Sony logo, on the sticker,

and also on the TV box (white label). Record these
numbers in the spaces provided below. Refer to them
whenever you call upon your Sony dealer regarding this

product.

Model No.__________________________

Serial No.__________________________

ENERGY STAR® is a U.S. registered mark.

Advertising