Sony STR- D915 - Manual (Page 12)

Receiving Broadcasts
Automatic Tuning
you do not know the frequency of the station, use
utomatic tuning.
POWER-»ON [
2
LEVEL
4 3
Select SPEAKERS
A and/or B
Press TUNER.
Press FM/AM to select FM or AM.
3
Press DISPLAY if the frequency is not
dispiayed.
4
Press INDEX SELECT/TUNING + or -.
For a higher frequency, press INDEX SELECT/
TUNING +.
For a lower frequency, press INDEX SELECT/
TUNING-.
When a station is received, automatic tuning stops
automatically. Press + or - until the desired station
is received.
' the automatic scan stops frequently
or FM reception only)
0 receive only stations with strong signals, press LEVEL.
IGH appears on the display.
0 receive all receivable stations again (including stations
ith weaker signals),
ress LEVEL unHl HIGH goes off.
Presetting Stations
You'll most likely want to preset the stations you listen to
often. The receiver can store a total of 30 FM or AM stations.
Select SPEAKERS
A and/or B
Press TUNER.
Tune in the desired station.
(See "Direct Tuning" on page 11 or "Automatic
Tuning" in the left column.)
Press MEMORY.
"MEMORY” appears for a few seconds.
4
Press SHIFT to select the memory page (A , B
or C) while "MEMORY” is displayed.
Each time SHIFT is pressed. A, B or C appears
cyclically on the display.
5
Press the desired numeric button (1 to 0)
while "MEMORY" is displayed.
Repeat steps from 2 through 5 for presetting other
desired stations.
Use of memory pages
The memory pages (A, B and C) can be used to classify
stations according to the music category, station band, etc.
Replacing a preset station
Preset another station on the number of the station to be
replaced. The previously preset station will be erased.
IMPORTANT
The memorized station is maintained for approximately one
month even if the power cord is disconnected from the AC
wall outlet. If they are erased, store the stations again.
1 2