Sony 3-755-967-11(1) - Manual (Page 18)

Scan Tuning
Use scan tuning to automatically scan the stations in the frequency
range of a broadcast band.
1 Set the POWER/LOCK switch to POWER.
2 Press the OH/OFF button to turn the radio on.
3 Press the BAND button to select the band.
For SW, select the meter band. too.
4 Press the SCAN button.
Within the frequency range of the table on page 35, scan tuning
will begin and stop automatically for about 2.5 seconds when a
station is received.
5 When your desired station is tuned in, press the SCAN
button.
When you do not press the SCAN button, scan tuning will
continue.
6 Tune the station more precisely with the TUNE or -
button, if necessary.
On SENS selector
Normally set this selector to DX. When the scan stops so often, set
it to LOCAL.
34
Frequency range and channel step of each broadcast band
Band Meter band Frequency Channel step
MW
S31-1710 kHz 9 kHz
530-1710 kHz 10 kHz
531-1602 kHz ** 9 kHz
530-1610 kHz •* 10 kHz
SW
75 m
3700-4200 kHz*’
1 kHz
(Manual
tuning)
5 kHz
(Scan tuning)
3850-4200 kHz**
60m 4650-5150 kHz
49 m 5800-6300 kHz
41 m 6950-7450 kHz
31 m 9375-10000 kHz
25 m 11525-12150 kHz
21 m 13375-14000 kHz
19 m 14975-15600 kHz
16 m 17475-18100 kHz
13m 21320-21950 kHz
11 m 25475-26100 kHz
FM
87.50-108.00 MHz **
0.05 MHz
76.00-108.00 MHz *^
‘1 Countries except for Italy and Saudi Arabia
*2 Italy and Saudi Arabia
*3 Germany, Austria, Scandinavian countries, Italy and Saudi Arabia
*4 Countries except for *3
35