Sony SPP-SS960 - Manual (Page 18)

Note
Do not allow more than 20 seconds to elapse between each step of the
procedure.
Tips
• If you have entered a wrong number in step 3 and have not pressed
(PGMA/OL) (step 4) yet, just turn Jog Dial down to erase it. Then enter the
correct number.
One-touch dialing (continued)
• You may press Jog Dial instead of ( PGMAtOL) in step 4.
To store a number to be dialed via Private Branch Exchange
(PBX)
Before entering a phone number in Step 3 on page 17, do as follows:
1 Enter the outside line access digit (e.g., 9).
2 Press (PAUSE).
To change a stored number
1 Press (PGMA/OL).
2 Press one of the ONE-TOUCH DIAL buttons ((X) to (U)>).
The current number appears on the display.
3 Turn Jog Dial down to erase the current number.
4 Enter a new number.
5 Press (PGMA/OL).
Note
You can replace the stored number with a new number, but you can't just erase it.
Making calls with one-touch dialing
1 Press (TALK) and wait until "TALK" appears on the display.
2 Press one of the ONE-TOUCH DIAL buttons ((X) to (cT).
The phone number stored on the one-touch dialing button
will appear on the display and will be dialed.
To check the phone number before one-touch dialing
While the handset isn't in use, press one of the ONE-TOUCH DIAL
buttons ((A) to (Tc)).
The number stored on the button appears on the display for five
seconds. To dial the number, press (
talk ) while the number is
displayed.
18“ I Telephone Features