4 turn the jog dial to flash "on, 5 press the jog dial, 6 press menu again to exit the menu mode – Sony ICD-80 User Manual
Page 19: To cancel vor
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4
Turn the jog dial to flash "ON".
5
Press the jog dial.
The setting is completed.
6
Press MENU again to exit the menu
mode.
0
nj
, I op
UOR
-bW
0
L/3/nn|SP
__
/u n
v o-R
UOR
ON
0
I /u l] VO-R
_ f C
R E M A I N
I JM J (J5
When you record messages with VOR set to ON, the recording pauses
when no sound is detected, "RecStandby” appears and "VOR” flashes.
To cancel VOR
Follow the steps above and select "OFF” in step 4, then follow the rest of
the steps.
Note
VOR function is affected by the sound around you. Select the micropht^ne
sensitivity according to the situation(see page40). If recording is not satisfactoi s
after you have changed the microphone sensitivity, set VOR to OFF.
O
19