Sony ICD-80 - Manual (Page 33)

Notes
• You cannot set the alarm if you have not set the clock or there is no message in
the selected file (the unit will not enter the alarm setting mode when you press
MENU in Step 2 on page 30).
• If you wish to set the alarm to play back the messages in the secret file when
’the secret function is set to ON, first enter the ID code to unlock the secret file
(see page 28) and proceed with the alarm setting while "UNLOCKED" is
being displayed, or cancel the secret setting (see page 29).
• If you try to set the alarm to play back a message at a previously set time,
"AlreadySet” will be displayed, preventing new settings.
• If the alarm time comes while another message is being played back with an
alarm, the playback stops and and the new message will be played back.
Jf the alarm time comes during recording, alarm will sound for 10 seconds
after the recording is finished and playback begins. will flash when the
alarm time comes.
• If more than one alarm time comes during recording, only the first message
will be played back.
When the alarm time comes when the unit is in the menu mode, alarm will
sound and the menu mode will be cancelled.
• If you erase the message you set the alarm to play back, the alarm setting will
be cancelled.
• You can adjust the playback volume with the VOL control.
• Alarm setting will not be cancelled when the alarm playback finishes. To
cancel alarm setting, see page 32.
To cancel the alarm setting or change the alarm time
1 Select the message you set the alarm to play back, and press MENU.
"ALARM ON" will be displayed.
2 Press the jog dial to flash "ON".
3 To cancel the alarm setting: Press the jog dial to flash "OFF" and
press the jog dial.
To change the alarm date and time:
Press the jog dial. When the
alarm date is displayed, follow the steps 3 to 5 on pages 31 and 32 to
change the alarm date and time.
4 Press MENU to exit the menu mode.
O
3"
iD
-n
c
33