Sony STR-AV320 - Manual (Page 3)

[U POWER switch
Qj DIRECT TUNING button
CE Remote sensor (STR-AV320 only)
LU FM MODE button
When an FM stereo program is noisy or hard to receive,
press this button. The STEREO indicator goes out (the
sound is heard in monaural, but the reception will be
improved). To return to the stereo mode, press again or
change the frequency.
rS1 BAND selectors
ref Display window
[2 j tuning +/- buttons
[E MEMORY button
rSI Numeric buttons
ffl SHIFT button
[U PRESET +/- buttons
Fl2l VOLUME control and indicator
The indicator is only equipped with the STR-AV320
331 SPEAKERS selectors
Depress to select which speaker system to drive. For
both speaker systems, depress A and B.
Ji HEADPHONES jack (stereo phone jack)
3S TONE controls
Turn the TREBLE control to adjust the high frequency
sound. Turn BASS control to adjust the low frequency
sound.
BALANCE control
Turn clockwise to decrease the left channel volume, and
turn counterclockwise to decrease the right channel
volume.
TT) Function selectors
35) DBFB
(Dynamic Bass Feed Back) button and Indicator
To reinforce the bass frequency sound, press this
button.
[191 MUTING button and indicator (STR-AV320 only)
Press to attenuate the sound level immediately (-20 dB
ATT). Pressing this button makes the indicator be
lighted. To restore the sound level, press again.
[gl SURROUND button and Indicator
To obtain the surround effect, press this button.
Remote Commander RM-S103 (STR-AV320 only)
□ j power button
m DBFB button
[E TUNER PRESET + /- and SHIFT
buttons
3] VOLUME +/- buttons
l E surround button
[E MUTING button
m CD player operation buttons
D. (disc) SKIP: When your CD player is
equipped with multi-disc changer, use this
button to select loaded disc.
CD ►: Selects the CD function and starts
CD playback.
ra1 DECK B operation buttons (also for
single tape deck)
DECK B ◄/►: Select tape function and
start tape playback on deck B.
ran DECK A operation buttons
DECK A ◄/►; Select tape function and
start tape playback on deck A.
33'Function select buttons.