Sony TC-WE435 - Manual (Page 10)

Advanced Recording Operations
Fading In and Out (Fader)
You can gradually increase the recording level at the
beginning of a recording (fade in) or gradually
decrease the recording level at the end of a recording
(fade out).
It is convenient to use this function, for example, when
the tape reaches to its end and you don't want the track
to be cut off abruptly.
AUTO indicator
FADER
To Do the following:
Fade in 1 Follow Steps 1 to 4 of "Recording on a
Tape" on page 6.
2 Start playing the program source and
■ press FADER at the point where you
' want the fade-in to start. During fade-
in, the AUTO indicator flashes. When
the fade-in has completed, the AUTO
indicator goes off. (The AUTO
indicator lights continuously if the
Auto Rec Level function is on.)
Fade out While you're still recording, press
FADER at the point where you want the
fade-out to start. When the fade-out has
completed, "REC" flashes in the display
and the deck pauses.
Note
Fade-in or fade-out is not possible when the REC LEVEL
control is set to 0 (minimum).
Dubbing a Tape
You can copy a tape in deck A to a tape in deck B at
normal or high speed.
DIRECTION MODE PAUSE II O/O HIGH/NORMAL
1 Insert a recorded cassette into deck A and a blank
cassette into deck B.
Make sure the record-protect tabs on the cassette in
deck B have not been removed.
2 Select the side(s) to be recorded on.
To record on Set DIRECTION MODE to
One side Z=i'.
Both sides cr:^.
Recording on the reverse side on
deck B starts independently of
playback on deck A.
RELAY.
Recording on the reverse side on
deck B starts simultaneously with
playback of the reverse side on
deck A.
Select the dubbing speed.
To select Press HIGH/NORMAL
Normal speed Once
Fligh speed Twice
"HIGH" or "NORM" appears in the display.
The deck changes to dubbing standby.
Select the side from which to start dubbing.
To record from Press
The front side o
The reverse side <]
Press PAUSE II to start dubbing.
1 0