Sony PCV-E205 - Manual (Page 101)

On Handling
□ Clean the cabinet with a soft, dry cloth or a soft cloth lightly
moistened with a mild detergent solution. Do not use any type of
abrasive pad, scouring powder, or solvent such as alcohol or benzine,
as it may damage the finish of your Sony computer.
□ Should any solid object or liquid fall into the cabinet, keyboard, or
mouse, shut down your computer and then unplug it. You may want
to have the computer checked by qualified personnel before
operating it any further.
Other Information
On Installation
□ Do not place your Sony computer in a location subject to:
□ Heat sources, such as radiators or air ducts
□ Direct sunlight
□ Excessive dust
□ Moisture or rain
□ Mechanical vibration or shock
□ Strpng magnets or speakers that are not magnetically shielded
□ Ambient temperature of more than
95®F (35“C) or less than
50“F (10“C)
'□ High humidity
□ Do not place electronic equipment near your computer. The
computer’s electromagnetic field may cause a malfunction.
□ Provide adequate air circulation to prevent internal heat
build-up. Do not place your computer on loose surfaces (such as rugs
or blankets) or near materials (such as curtains or draperies) that may
block its ventilation slots. Leave a space of at least 8 inches from the
back panel of your computer.
□ The computer uses high-frequency radio signals and may cause
interference to radio or TV reception. Should this occur, relocate the
computer a suitable distance away from the set.
□ Use only specified peripheral equipment and interface cables;
otherwise, problems may result.
□ Do not use cut or damaged connection cables.
□ Always switch the power off before connecting your computer to
peripheral equipment: otherwise, damage may occur to the
integrated circuits in your computer.