Sony MDS-JA3ES - Manual (Page 2)

Editing Recorded MDs
Labeling tracks and MDs with the remote |j]
^ GD CD ^ ryi
:p cp cp cs]
^ CyD pp ^ ^
rrp np
S3
[p QJ3 03 ^
EaCi'ûaa
Changing an existing title [x]
1
Press NAME, then do the following:
■ Alphabet/number
buttons
■ CLEAR
■NUM
Press NAME repeatedly until a flashing cursor
appears in the display, then do the following:
To label Make sure that the deck is
A track Playing, pausing, recording the track
to be labeled, or stopped after
locating the track to be labeled
An MD Stopped with no track number
appearing in the display
Select the character type as follows:
To select Press
Lowercase letters CAPS repeatedly until "Selected
abc" appears in the display
Uppercase letters CAPS repeatedly until "Selected
ABC" appears in the display
Numbers NUM repeatedly until "Selected
123" appears in the display
3
Enter one character at a time.
After you enter a character, the cursor shifts
rightward and waits for the input of the next
character.
4
Repeat Steps 2 and 3 until you have entered the
entire title.
if you entered the wrong character
Press ■« or ►► until the character to be corrected starts
flashing.
Press CLEAR to erase the incorrect character, then enter
tlie correct one.
5
Press NAME again.
The entered title appears on the left side of the
display window after the label has been recorded.
To cancel labeling
Press ■.
To change Make sure that the deck is
A track title Playing, pausing the track whose
title is to be changed, or stopped
after locating the track whose
title is to be changed
A disc name Stopped with no track number
appearing in the display
2
Keep pressing CLEAR (or EDIT/NO on the deck)
until the current title is erased.
3
Enter the new title.
Do Steps 3 to 5 of "Labeling Recordings" on page 28,
or Steps 2 to 4 of "Labeling tracks and MDs with the
remote" on this page.
4
Press NAME.
Erasing all titles on a disc (Name Erase
Function)
Use this function to erase all titles on an MD
simultaneously.
Note that once erased, titles cannot be recovered.
1
Keep pressing EDIT/NO while the deck is stopped
until "All Erase ?" appears in the display.
2
Press EDIT/NO again.
"Name Erase ?" appears in the display.
3
Press YES.
All titles are erased.
To cancel the Name Erase Function
«
Press ■.
You can erase all recorded tracks and titles
See "Erasing aU tracks on an MD" on page 24.
29