Cobra Electronics 25 WX NW ST - Manual (Page 11)

21 20
Operation Operation
PA (Public
Address) PA (Public Address)
Connect an external PA speaker to the PA jack
on the rear panel.
Note
Speaker should have 8-ohm
impedance and be rated to
handle at least 4.0 watts.
Note
The speaker should be directed
away from the microphone to
prevent acoustic feedback.
Note
Activity on the CB channel will
be heard through the PA speak-
er. Adjust volume control to a
normal listening level.
1
Set CB/ANL PA switch to PA position. 2
Push and hold microphone button and speak
in a normal voice.Your voice will sound on the
PA speaker.
Adjust PA speaker volume with the
Dynamike control.
3
4
25 WX NW ST Manual 3.3 6/15/99 1:10 PM Page 20