Cobra Electronics 25 WX NW ST - Manual (Page 5)

The CB/ANL/PA button should be in the
CB/ANL position and CB/WX on CB position.
Operation
9
Operation
Turning On Setting Channel
Selector
8
Turning On
Make sure the power cord, antenna and micro-
phone are connected to their proper connec tors
before starting.
Setting Channel Selector
2
1
Ro t ate the On/Off Volume knob c l oc kw i s e to
a normal listening level.
Select one of forty channels and adjust
volume. The selected channel is indicated by
the LED readout directly above the channel
selector knob
1
25 WX NW ST Manual 3.3 6/15/99 1:10 PM Page 8