To correct the date and time settings, To check the preset date and time, To reset to standard time – Sony CCD-TR61 User Manual
Page 13: Inserting a cassette, To elect the cassette
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To Correct the Date and Time Settings
Press TIME (NEXT) repeatedly until the minute digits stop flashing. Then repeat steps 4 to 7.
To Check the Preset Date and Time
Press DATE (+) or TIME (NEXT). When you press the same button again, the indicator goes off.
To Reset to Standard Time
Press DST. The ^ indicator goes off.
Note on the setting of the year
When you set the year, each time you press DATE (-t-) the digits change as follows.
1993
Í
1994
2020
Note on the time indicator
The internal clock of this camcorder operates on a 12-hour cycle.
12:00 AM stands for midnight.
12:00 PM stands for noon.
Inserting a Cassette
Make sure that the power source is installed. (1) While pressing the small blue button on the EJECT
knob, slide it down. The cassette holder automatically lifts up and opens. (2) Insert a tape with the
window facing out. (3) Close the cassette holder by pressing the "PUSH" mark on the cassette holder.
To Elect the Cassette
While pressing the small blue button on №e EJECT knob, slide it down.