Identifying the parts – Sony CCD-TR61 User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Identifying the Parts
(T|
POWER twitch (p. 16.23)
HI
CAMERA; for camera recording
PLAYER: for playing back or editing a tape
OFF:
power off
[Tl EJECT knob (p. 13)
Slide it to insert a cassette into the cassette [
t
J
holder or to eject the cassette.
[Tl
REMOTE tt (LANC) control Jack
Connect the LANC tt connecting cable to a
wired remote control unit such as an editing
controller. In this case, set the REMOTE
COMMANDER switch to OFF.
it stands for Local Application Control Bus
System. The tt controt Jack Is used tor
controlling the tape transport of video
____
equipment and peripherals connected to It.
[9j
This Jack has the same function as the Jack
Indicated as CONTROL L or REMOTE.
[T] START/8TOP button (p. 16)
To start recording, press it after setting the
POWER switch to CAMERA and turn the
STANDBY switch to STANDBY. To stop
recording momentarily, press it again.
[si STANDBY switch (p. 16)
STANDBY; To set the camcorder to recording ___________
standby mode.
pm
LOCK:
To stop recording or to prevent
from accidentally recording and
wearing down the battery.
Grip strap (p. IS)
Put your hand through the grip strap lo hold
the cantcorder. Adjust the length of the strap
so that your thumb can easily touch
START/STOP.
Power zoom button (p. 18)
Press it to change the size of the subject in
the scene.
T side: for telephoto (subject appears closer)
W side: lor wide-angle (subject appears
further away)
Cassette holder (p. 13)
When you slide the EJECT knob, this holder
lifts up and opens automatically.
MIC Jack (PLUG IN POWER)
Connect an optional external microphone
(stereo or monaural). This jack also accepts a
"plug-in-power" microphone.
AudlofVIdeo output Jacks (p. 22)
To view the recorded picture on the TV or to
rerecord onto another tape, connect these
jacks and the Audio/Video input Jacks on the
TV or VCR using the supplied A/V connecting
cable.
RFU DC OUT (RFU adaptor DC output) Jack
(P
22)
To view the recorded picture on a TV that has
only an antenna input, connect the RFU
adaptor here.
l12 Jack cover