Removing the battery pack, Installing the battery pack – Sony CCD-TR61 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Removing the Battery Pack
Slide the battery pack in the direction of the arrow (see drawing).
Installing the Battery Pack
(1) Lift up the viewfinder. (2) Align the right side of the battery pack with the white ilne on the camcorder,
and slide the battery pack to the right.
Removing the Battery Pack
(1) Lift up the viewfinder. (2) While pressing ВАТТ, slide the battery pack to the left.
0
S'
Ш
<o
3*
<o
tt
Э
a
5*
1
Ш
I
•3
Note on charging the battery pack
e The POWER lamp will remain lit for a while even if the battery pack is removed and the power cord is
unplugged after charging the battery pack. This is normal,
a tt ttte POVIER lamp does not light, set the selector to OFF and disconnect the power cord. After about
one minute, reconnect the power cord and set the selector to CHARGE again,
e You cannot operate the camcorder using the AC power adaptor while charging the battery pack.