Checking the contents of a tape, Before you start, Smartfile sensor cursor 1 – Sony SLV-M91HF User Manual
Page 55: Turn on your tv and set it to the video chaimel, Press cursor 4^/'^ repeatedly to turn the pages, Press ok on the vcr to exit the menu, Qurr, Tips
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Checking the
contents of a tape
SmartFile sensor CURSOR
1
____
m
ill
□
: 1 |o¿iT
OK
You can display the program data list of
a SmartFile tap>e on the TV screen. It is
not necessary to insert the tap>e into the
VCR. This feature allows you to quickly find a specific program or to
find a tape with enough recording space.
The SmartFile check list can contain up to 12 programs.
Before you start...
• Turn on your TV and set it to the video chaimel.
1
Hold the label side of the SmartFile tape
close to the SmartFile sensor.
Slowly bring the center of the label within
3 cm of the SmartFile sensor.
There is a short beep, the SMARTFILE
indicator lights up, and the SmartFile
check list appears.
The BLANK indicator lights up and the Blank
lime space also appears in the display
window.
2
Press CURSOR 4^/'^ repeatedly to turn the
pages.
EZS
R1AM( TME CP 1
m
48
m
)KJK
9:00w CH 16
8/30
6 : SOW CH 4
8/20
m
8:00
m
ch
12
8/27
m
S:4S
m
cm
7
0/27
7HÜ
1 OOw CM IP
e/26
lii
4 :30
m
cm
8
Í724
NEXT:®
Press OK on the VCR to exit the menu.
BLANK TIME
EP
1
h
48
m
SIIN
6:30
m
cm
16
6/22
8 :00
m
ch
12
6/20
IVF
0 :30
m
ch
16
8/17
MTM 6 :30
m
ch
16
6/16
n
8 :00
m
ch
12
8/13
TUE
2:30
m
ch
B
8/10
BACK:®
QUrr
3
Tips
• The SmartFile check list automatically disappears after about 3 minutes of nonuse.
• If you press SP/EP while the SmartFile check list is displayed, the BLANK TIME
remaining tape display changes.
• You can edso use the cursor stick 4/4 and OK on the remote commander.
• If you press a button other than SP/EP or the cursor stick (OK), the SmartFile check
list disappears.
Notes
• You cannot display the SmartHIe check list while:
-you display the SmartFile list of a different SmeutFile tape inserted into the VCR.
- you display any other menu.
- you play back the tape at any speed other than normal.
-you view the camcorder picture using LASER LINK.
• If the SmartFile check list doesn't appear on the TV screen, try again by drawing the
SmartFile tape away from die SmartFile sensor at least 5 cm, then bring it back to
within 3 cm of the sensor.
SmartFile Function
55