Sony SLV-M91HF - Manual (Page 9)

Tips
• To select a channel you can use the number buttons on the remote commander.
Enter the channel number, then press ENTER.
• You can select a video source from the LINE-1 IN or LINE-2 IN jacks using the
INPUT SELECT button.
• "L3" is reserved for LASER LINK input when viewing the camcorder picture
(page 35). Cable connection is recommended when recording the picture from the
camcorder (p>age 38).
• The display appears on the TV screen indicating information about the tape, but the
information won't be recorded on the tape.
• If you don't want to watch TV while recording, you can turn off the TV. When
using a cable box, make sure to leave it on.
• You can set the chaimel with the shuttle ring during stop. However, you caimot set
the channel with the shuttle ring on the remote commander when:
-you set CABLE MOUSE in the CABLE BOX CONTROL menu to ON.
-you press JOG so that the remote commander is in jog mode.
Notes
• The remaming tape length may not be indicated accurately for short tapes such as
T-20 orT-30, or tapes recorded in the LP mode.
• The display does not appear during still (pause) mode or slow-motion playback.
• It may take up to one minute for the VCR to calculate and display the remaining
tape length after you press DISPLAY.
Basic Operations