Sony SLV-M91HF - Manual (Page 71)

Symptom Remedy
A tape cannot be inserted. • Check that a tape isn't already in the tajje
compartment.
The remote commander does
not function. • Make sure you are pointing the remote commander at
the remote sensor on the VCR.
• Replace all the batteries in the remote commander with
new ones if they are weak.
• Make sure the iTVl/IVIDEOl switch is set correctly.
• If you are not using S-Link™, make sure that both
miniplugs are unconnected.
• The command mode of the remote commander is
different from the one of the VCR.
Tlie diannels on the VCR
cannot be changed. • Make sure the CABLE BOX CONTROL option is set to
OFF.
The tracking meter does not
appear on the screen. • The recording condition of the tape is very poor and
tracking cannot be adjusted.
You cannot control other TVs. • Set your TV's code number. The code number may
change when you replace the batteries of the remote
commander.
The SMARTFILE screen
appears when a tape is not
inserted.. • Press ■ STOP to close the SMARTFILE demonstration
screen.
The VCR needs to be cleaned. • Qean the cabinet, panel and controls with a dry, soft
cloth, or a soft cloth slightly moistened with a mild
detergent solution. Do not use any type of solvent,
such as alcohol or betmne.
Additional Information 71