To prepare the remote commander, Rmt-708, Note on battery life – Sony CCD-TRV95 User Manual

Page 107: To avoid damage from possible battery leakage, To watch the demonstration, To enter demo mode, To exit demo mode, Identifying the parts

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Identifying the parts

To prepare the Remote Commander

Insert two size AA (R

6) batteries bv matching the + and - on the batteries to the

diagram inside the battery compartment.

V /

104

RMT-708

Note on battery life

The batteries for the Remote Commander last about j months under normal operation.

When the batteries become weak or dead, the Remote Commander does not work.

To avoid damage from possible battery leakage

Remove the batteries when you will not use the Remote Commander for a long time.

To watch the demonstration

You can start the demonstration by setting DEMO MODE in the menu system.

You can also start the demonstration by the following operation.

When NIGHTSHOT is set to ON, you cannot watch the demonstration.

To enter demo mode

(1) Eject the cassette and set the POWER switch to VTR.

(2)

Turn STANDBY up to STANDBY.

(3)

While holding down ► set the POWER switch to CAMERA.

To exit demo mode

(1) Set the POWER switch to VTR.

(2)

Turn STANDBY up to STANDBY.

(3)

While holding down ■ set the POWER switch to CAMERA.

Advertising
This manual is related to the following products: