Checking the recorded picture, To stop playback, To begin re-recording – Sony CCD-TRV95 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Checking the recorded picture
Using EDITSEARCH, you can review the last recorded scene or check the recorded
picture in the viewfinder or on the LCD screen.
(
1
) While pressing the small green button on the POWER switch, set it to
CAMERA.
(2)
Turn STANDBY up to STANDBY.
(3)
Press the - (@) side of EDITSEARCH momentarily; the last few seconds of fhe
recorded portion play back
(Rec Review).
You can monitor the sound from the speaker or headphones.
Hold down the - side of EDITSEARCH until the camcorder goes back to the
scene you want. The last recorded portion is played back. To go forward,
hold down the + side
(Edit Search).
1
POWER
■ ICAMERAl
■ OFF
■
+ EDITSEARI
To stop playback
Release EDITSEARCH.
To go back to the last recorded point after edit search
Press END SEARCH. The last recorded point is played back for about 5 seconds (10
seconds in LP mode) and stops. Note that this function does not work once you eject the
cassette after you recorded on the tape.
To begin re-recording
Press START/STOP. Re-recording begins from the point you released EDITSEARCH.
Provided you do not eject the cassette, the transition between the last scene you
recorded and the next scene you record will be smooth.
21