Resetting the date and time, To correct the date and time setting, To check the preset date and time – Sony CCD-TRV95 User Manual
Page 86: The year changes as follows, Note on the time indicator
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Resetting the date and time
You can reset the date and time in the menu system.
(
1
)
While the camcorder is in Standby mode, press MENU to display the menu.
(
2
)
Turn the control dial to select e , then press the dial.
(3)
Turn the control dial to select CLCXZK SET, then press the dial.
(4)
Turn the control dial to adjust the desired year, then press the dial.
(5)
Set the month, day, hour and minute by turning the control dial and pressing
the dial.
(
6
)
Press MENU to erase the menu display.
>
a.
To correct the date and time setting
Repeat the above procedure.
To check the preset date and time
Press DATE to display the date indicator.
Press TIME to display the time indicator.
When you press the same button again, the indicator goes off.
The year changes as follows;
1997 «-► 1998
• ■ ■ ■ -+ 2029
L
J
Note on the time indicator
The internal clock of this camcorder operates on a 12-hour cycle.
• 12:00 AM Stands for midnight.
• 12:00 PM Stands for noon.
83