Connecting a dvd player, When your dvd player has stereo analog outputs, Notes – Sony MHC-RXD7AV User Manual
Page 36: Coimecting a dvd player
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting a DVD
player
Select one of the following two connections,
depending on your DVD player.
When your DVD player has 5.1
channel analog outputs
Make sure to match the color of the plugs and
the connectors. To listen to the sound of the
connected DVD player, press DVD 5.1CH so
the indicator on the button Ughts up.
When you listen to a stereo sound track of the
DVD player, press DVD 5.1CH to turn the
indicator off.
1/6 (Power) DVD 5.1CH, indicator
To the front output
of the DVD player
To the center output
of the DVD player
of the DVD player
of the DVD player
When your DVD player has stereo
analog outputs
Make sure to match the color of die plugs and
the connectors. Connect the LINE OUT
(audio) output jacks of your DVD player to
the FRONT jacks of DVD INPUT widi the
audio connecting cable. To listen to the sound
of the connected DVD player, press DVD
5.1CH to turn off the indicator on the button.
Notes
• Each time you press DVD 5.1CH, the function
changes as follows;
DVD5.1CH
DVD (2 channel)
(indicator on)
(indicator ofO
• You cannot enjoy the 5.1 channel surround sound
if you connect a DVD player which does not have
the 5.1 charmel analog outputs.
• If there is no sound when you connect a DVD
player which has 5.1 charmel analog outputs,
connect the LINE OUT (audio) output jacks of
your DVD player to the MD IN jacks, ttien change
the function to MD by pressing FUNCTION.
36