Receiving preset stations – Sony ST-SA50ES User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Receiving Preset Stations
This section shows you liow to receix’e preset stations.
3
To tune in a non-preset station,
see "Tuning stations
(Automatic Tuning)" on page 8.
1
Make sure you've hooked up the tuner and preset stations.
(See pages 5 - 7 for hookups and page 8 for presetting.)
2 Turn on the amplifier and select the TUNER mode.
3
Press ® to turn on the tuner.
Press SHIFT to select A, B, C, or D.
^ Press the preset number you want (1 - 0).
To check broadcasts by scanning the preset stations
1
Press TUNE MODE repeatedly until "PRESET" appears in the display.
2
Turn TUNING/SELECT.
Each time you turn TUNING/SELECT, a preset station is received and
the settings (preset code, frequency, and station name, etc.) appear in the
display. The signal meter indicates the strength of the broadcast signal.