Sony ST-SA50ES - Manual (Page 7)

Getting Started
Amplifier hookups
Connect the tuner to an amplifier. Be sure to turn off
the power to both components before connection. For
the specific location of the terminals, see the illustration
below.
LINE OUT
What cables will I need?
• Audio cord (supplied) (1)
White (L)
Red (R)
.White (L)
> Red (R)
Connect the white plugs to the white (L) jacks and the red
plugs to the red (R) jacks. Insert the plugs completely into
the jacks; incomplete connections may cause noise.
Power connection hookup
Connect the power cord to a wall outlet after completing all
of the previous connections.
© © ^ ©®
i
to a wall outlet
About the Menu Entry System
This tuner uses a menu entry system which allows you
to operate various functions by following messages
that appear in the display. Use the following controls
for menu operation.
Use the To:
MENU button enter the menu mode.
TUNING/SELECT knob display different items or
settings.
ENTER button select the currently displayed
item or setting.
RETURN button return to a previous stage in the
menu mode.
Customizing the Display
You can choose the appearance of the display from one
of the following four display modes.
1 Press MENU, then turn TUNING/SELECT until
"Disp-Mode" appears in the display.
2 Press ENTER.
"Select" appears in the display.
3 Turn TUNING/SELECT to select a display mode.
Full Display/Full Brightness
♦
Full Display/Dimmed
♦
Minimal Display/Full Brightness
4-
Minimal Display/Dimmed
4
Press ENTER.
The setting remains in effect until vou change it
again.
If you press one of the buttons on the main unit,
the minimal display changes to the full display
with the selected brightness. After about 4
seconds, the display returns to the display mode
you selected.