Mulching mowing tips – Craftsman 917.270822 User Manual

Page 17

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

If grass is extremely tall, it should be
mowed twice to reduce load and pos­
sible fire hazard from dried clippings.

Make first cut relatively high; the second

to the desired height.

Do not mow grass when it is wet. Wet

grass will plug mower and leave unde­
sirable clumps. Allow grass to dry be­
fore mowing.

Always operate engine at full throttle

when mowing

to assure better mowing

performance and proper discharge of
material. Regulate ground speed by se­
lecting a low enough gear to give the

mower the best cutting performance as

well as the quality of cut desired.
When operating attachments, select a

ground speed that will suit the terrain
and give best performance of the at­
tachment being used.

MULCHING MOWING TIPS

IMPORTANT:

For best performance, keep

mower housing free of built-up grass and
trash. Clean after each use.
* The special mulching blade will recut

the grass clippings many times and re­
duce them in size so that as they fall

onto the lawn they will disperse into the

grass and not be noticed. Also, the
mulched grass will biodegrade quickly

to provide, nutrients for the lawn. Always

mulch with your highest engine (blade)
speed as this will provide the best re­
cutting action of the blades.

Avoid cutting your lawn when it is wet.

Wet grass tends to form clumps and in­
terferes with the mulching action. The

best time to mow your lawn is the early
afternoon. At this time the grass has
dried and the newly cut area will not be
exposed to the direct sun.
For best results, adjust the mower cut­
ting height so that the mower cuts off

only the top one-third of the grass
blades. For extremely heavy mulching,
reduce your width of cut on each pass
and mow slowly.
Certain types of grass and grass condi­
tions may require that an area be

mulched a second time to completely
hide the clippings. When doing a sec­
ond cut, mow across or perpendicular

to the first cut path.
Change your cutting pattern from week

to week. Mow north to south one week
then change to east to west the next
week. This will help prevent matting and

graining of the lawn.

Max 1/3

17

Advertising