HP 730 User Manual
Page 74
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Probie
! Battery voltage
i is too low for
icharging to
i start.
I
Possible cause
- t.
i The wrong AC
I power adapter
i is being used.
I
¡The batteries
¡are damaged
¡or bad.
The camera
does not
recognize that
there are no
batteries
installed.
The camera will not attempt to
charge batteries that may be
damaged or over-discharged.
Remove the batteries from the
camera and charge them in an
external battery charger, then try
them in the camera again. If this
does not work, it is likely that one
or more of the batteries are bad.
Purchase new NiMH batteries
and try again.
Use only the HP AC power
adapter approved tor use with
this camera. See Purchasing
camsra accessories on page 102.
NiMH batteries degrade over
time and can fail. H the camera
detects a problem with the
batteries, it will not start charging
or will stop charging prematurely.
Purchase new batteries.
Do nothing. The blinking is
harmless and should stop after
5-30 minutes.
Solution
76
hp photosmart 730 series user's manual