Craftsman YS 4500 917.28990 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
10.
Turn steering wheel to position wheels
straight forward.
11.
ATTACH FRONT LINK (E) - Work from
left side of tractor. Insert rod end of link
assembly through front hole in tractor
front suspension bracket (F) and secure
with retainer spring (G) through hole in
link located behind the bracket.
12. Insert other end of link (E) into hole in
front mower bracket (H) and secure with
washer and retainer spring (J).
13. Disengage belt tension rod (K) from lock
ing bracket (L).
14. Install belt onto engine clutch pulley (M).
IMPORTANT: Check belt for proper routing
in ail mower pulley grooves.
15. Engage belt tension rod (K) on locking
bracket (L).
A
CAUTION: Belt tension rod is spring
loaded. Have a tight grip on rod and engage
slowly.
16. Raise attachment lift lever to highest
position.
17. If necessary, adjust gauge wheels
before operating mower as shown in the
Operation section of this manual.