Installing the seat, Assembly – Craftsman 107.289860 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
ASSEMBLY
INSTALLING THE SEAT
1. Raise the seat base (see Figure 1).
2. Align the holes in the seat bottom with the holes in
the seat base.
3. Secure the seat to the seat base with two 5/16-18 x
3/4 serrated head bolts for the rear seat slots, and
two 5/16-18
X
3/4 shoulder bolts for the front slots.
4. Tighten to 14-19 ft-lbs (19-25 Nm).
10
Advertising
This manual is related to the following products: