Installing the seat safety switch – Craftsman 107.289860 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
INSTALLING THE SEAT SAFETY
SWITCH
1. Squeeze the side clips of the safety switch (A, Figure
2), and insert the switch into the slot (B) in the seat
bottom. Be sure to slide the switch fully forward.
2. Connect the harness terminal housing (C) to the seat
switch.
3. Loop the wire tie (D) around both the switch body and
the terminal housing.
11
Advertising
This manual is related to the following products: