Replace spark plug – Craftsman 107.289860 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
REPLACE SPARK PLUG
Service Interval: Yearly
Replacement Spark Plug: 491055S
Spark Plug Gap: .030” (.76 mm)
1. Stop the engine and allow it to cool.
2. Clean the area around the spark plug.
3. Remove the spark plug.
4. Check the spark plug gap. It should be .030” (see
Figure 34).
5. Reinstall the plug into the cylinder head. Tighten the
plug to 180 in-lbs (20 Nm).
29
Advertising
This manual is related to the following products: