Troubleshooting, Adjusting the image during recording, Playback on your camcorder – Samsung HMX-Q10TNIHMX-Q100TNIHMXDQ130TN User Manual
Page 105: Playback on other devices (tv, etc.)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Troubleshooting
Adjusting the image during recording
Focus does not adjust automatically.
Image’s color balance is not natural.
A suDjeci passing quicKiy inrougn me rrame
appears distorted
Set
“Focus" to “Auto”. (Video recording mode only) '^page 53
The recording conditions are not suitable for auto focus. Adjust the focus manually. (Video
recording mode oniy) ^page 53
The lens is dusty on the surface. Clean the lens and check the focus.
Recording is being made in a dark location. Use a light to brighten the area.
I he white balance is incorrect. Set the proper
"White Balance", '^page 50
I his IS called the focal plane phenomenon. Ï his is not a malfunction. Because of the way
the image device (CMOS sensor) reads out video signals, a subject passing through a
frame rapidly may appear to bend, depending on the recording conditions.
Playback on your camcorder
Playback (playback/pause) function does not
work.
Photo images stored on a storage media are
not displayed in the actual size.
Playback is interrupted unexpectedly.
Playback on other devices (TV, etc.)
Image files recorded using another device may not play back on your camcorder.
Check memory card compatibility, '«page 31
Photo images recorded on other devices may not appear in their actual size. This is not
an error.
Check if the AC power adaptor or battery back is properly connected and secure.
You cannot view the image on or hear the
sound from the connected device.
The image appears distorted on a TV.
You cannot view the image on or hear the
sound from a TV oonnected using the FIDMI
cable.
Make sure that the connection cable is connected to the proper jack.
This phenomenon is caused by connecting to a TV with 4:3 aspect ratio.
The camcorder cannot output Images from the FIDMI jack if the material is copyright
protected.
101