Samsung HMX-Q10TNIHMX-Q100TNIHMXDQ130TN - Manual (Page 106)

Troubleshooting
Connecting/Dubbing with other devices (Recorder, PC, Printer, etc.)
You cannot dub correctly using the HDMI
cable.
* You cannot dub images using the HDMI cable.
You cannot dub correctly using the Audio/
Video cable.
Your PictBridge printer cannot print photos
from your camcorder.
* The Audio/Video cable is not connected properly. Make sure that the Audio/Video cable
is connected to the proper jack, i.e. to the input jack of the device used for dubbing
images from your camcorder, '^page 83
® Your printer may not print images edited on a computer or recorded using other devices.
This is not an error.
Connecting to a computer
Your computer does not recognize your
camcorder.
* Disconnect the USB cable from the computer and camcorder, restart the computer, and
then connect the USB cable again correctly.
Cannot play back a video file properly on a
PC.
® You need a video codec to play back the file recorded on your camcorder. Install the
software provided with your camcorder, ^page 88
® Make sure you insert the connector in the correct direction, and connect the USB cable
to the USB jack on your camcorder firmly.
® Disconnect the cable from the computer and camcorder, restart the computer, and then
connect the cable again properly.
® To play back an HD video file, you need a computer with better specifications.
Use a computer with the recommended specifications, '^page 86
intelli-studio does not function properly,
intelli-studio does not start.
102
® Exit the intelli-studio application, and restart the Windows computer.
® Set “PC Software” to “ON” in the Settings menu or install Intelli-studio on the computer,
'«pages 70, 88