I to insert a memory card, To eject a memory card, Ettinq ready to start recoi – Samsung HMX-Q10TNIHMX-Q100TNIHMXDQ130TN User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ettinq ready to start recoi
I To insert a memory card
[To eject a memory card
1 Slide and open the memory oard oover as shown in the figure.
2
Insert the memory oard into the oard slot until it softly olioks.
• Make sure that the terminal portion of the card is facing down
and the camcorder is placed as shown in the figure.
3
Close the memory card cover.
1 Slide and open the memory card cover as shown in the figure.
2
Gently push the memory card to eject it.
3
Close the memory card cover.
•
To avoid the data loss, turn off the camcorder by pressing and hold the Home (#) button before inserting or ejecting the memory card.
•
Be carefui not to push the memory card too hard. The memory card may suddenly pop out.
Your camcorder supports only SD and SDHC oards.
The compatibility with the camcorder may vary depending on the manufacturer and the type of memory card.
30