Canon Digital Video Camcorder FS200 - Manual (Page 34)

Quick Start Function
34
2
When you wish to resume recording, open the LCD panel.
X
1 Changes back to green.
IMPORTANT
• Do not disconnect the power source during standby mode (while the ON/
OFF (CHG) indicator is lit in orange).
NOTES
• If you close the LCD panel under some circumstances (for example while
recording, while a menu is being displayed in flexible recording mode, while
the battery charge is low, or while the memory card slot cover is open), the
camcorder may not enter the standby mode. Check that the indicator
changes to orange.
• The camcorder will shut off if left in standby mode for 10 minutes. In that
case, press
to turn on the camcorder. You can select the length of
time until shut-off or turn off the Quick Start function.
See [QUICK START] , 87 for details.
• You can use the Quick Start function also in the flexible recording modes in
the same manner.
Green - ready
to record Orange - standby
beep!