Craftsman 132.24607 User Manual

Page 13

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

• Using a supplied cable tie (J) organize any

excess iength of supply tubes and stow

behind battery {or along fuel tank if

equipped). Secure supply tubes to
electrical supply lines of tractor at
convenient locations to prevent line
damage during tractor operation.

step 2

•

Using remaining cable ties (J) secure

supply tubes to tractor frame along length

under tractor body.

IMPORTANT: Use care not to over tighten

cable ties (J) and pinch supply lines as system

will not function properly. Cable ties are used

as a means to route lines safely away from heat
and possible pinch points during tractor opera­

tion. Following paths of your tractor’s electrical

supply lines ensures the best possible results.

•

Reconnect negative (-) battery terminal to

tractor electrical system.

Before you operate your rider cooling

system, please review the following
checklist to ensure that you will obtain the

best performance from your system.

•

Make sure all assembly instructions have

been completed with all bolts and nuts

tightened.

•

Make sure hose connections at the filters

have been made and are fully engaged.

•

Make sure electrical connection has been

made and is secure.

•

Check routing of supply lines and make
sure they do not interfere with pedals,
pulleys, or belts.

•

Check supply lines in engine compartment
and ensure they are safely routed away

from the engine.

•

Check the supply lines as they exit the
power unit and ensure the bend is
sufficient and does not kink the hoses.

•

Check the misting nozzle assembly to
ensure it does not interfere with tractor
controls.

•

Turn tractor key to “ON” position and turn

cooling system power unit on.

•

Confirm that the cooling system
pump starts.

•

Confirm the flow of air from the
cooling nozzle.

•

Open the tractor hood and
ensure that filter connections
are maintained.

You are now ready to enjoy the benefits of your
cooling system .

Proceed to the OPERATION section of this
manual to begin using.

Checklist

13

Advertising