Troubleshooting, Problem cause solution – Craftsman 315.220380 User Manual
Page 59
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
TROUBLESHOOTING
PROBLEM
CAUSE
SOLUTION
Saw blade tends to push wood to
one side when cross cutting.
1. Blade is heeling.
2. Column tube is loose in coiumn
support.
3. Arm is loose or misaligned.
4. Fence/tabtes are not straight.
5. Blade or teeth are bent or dull.
1. See
Squaring the Blade to the
Fence
in
Adjustments
section.
2. See
Adjusting the Column
Tube
in Assemb/y section.
3. See
Setting the Arm Lock
Wheel
in the
Assembly
section.
4. Check with square; sand or
replace.
5. Sharpen or replace the blade.
See the removal procedure in
Assembly
section.
5»
CRfIFTSHItN' RADIAL SAW 315.220380
Advertising