Load film – Nikon N80 User Manual

Page 20

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

3

Load Film

Turn the power switch on and

load DX-coded film. With DX-

coded film, film speed will be set
automatically (ISO 25-5000).

When the camera Is turned on,
film is loaded and the camera

back is closed, the film

automatically advances to the

first frame.

3.1

Turn the power switch on, confirm that the film

speed setting is set to E0, then open the camera

back by sliding the camera back lock release lever.

3.2

• If the film speed setting is not set to BH, see page 36.

Insert film from the bottom side and pull film leader

out to red index mark.

> Do not insert the film leader beyond the red index mark.

NOTE: Loading/removing filin__________________________

Shutter curtains are very thin. Do not
touch the shutter curtains with your finger

or the film leader.

20

Advertising
This manual is related to the following products: