Nikon N80 User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
If film does not start to rewind or film rewind stops at mid-roll
• When battery power is very low, or at low temperatures, film may not start
rewinding or film rewind may stop at mid-roll, and o.. and frame number will
blink in the LCD panel. In this case, turn the power switch off, change
batteries, then turn the power switch on and rewind film again.
I
Film advance mode
Rotate the film advance mode selector while pressing
the film advance mode selector lock release to select
film advance mode.
• The following film advance modes are available;
[U: Single-frame shooting
Fully depressing the shutter release button takes one picture and
automatically advances the film by one frame.
Q|i: Continuous shooting
Shots are taken continuously at the rate of up to approx. 2.5 fps as long
as you keep the shutter release button fully depressed.
Film advance speed is tested using camera settings of focus mode M, exposure
mode M, shutter speed 1/125 sec. or faster, aperture other than maximum, at
normal temperature of 20°C (68°F), with fresh batteries, for the 1 st to 36th frames
of a film.
■ When the film advance mode selector is set to a, multiple exposure can be
performed (page 63). Also, when it is set to €), self-timer operation can be
performed (page 68).
37