Nikon N80 - Manual (Page 71)

I Menu number and Custom Setting options
* Refer also to the Custom Setting Menu table at the end of this instruction manual.
!. Automatic film rewind at the end of film roll (page 29)
Options: Q: Activated (initial setting)
I: Disabled
At initial setting, film rewind is automatically started when the end of the film
roll is reached. However, the camera can be set not to rewind film at the end
of the film roll but instead film rewind is started by pressing the two film
rewind buttons ai; for more than 1 sec.
c". Reset to DX film speed setting for new film (page 36)
Options: C: Activated (initial setting)
i: Disabled
At initial setting, film speed automatically sets to EH when a new film roll is
loaded even after manually setting film speed to other than EH. However, the
film speed setting can be changed to remain the same.
3. Bracketing order (page 62)
Options: 0: Metered value, under, over (initial setting)
I: Under, metered value, over
Bracketing is normally performed in the order of the initial setting (page 62).
However, this Bracketing order can be changed to be performed from
negative compensation to positive compensation.
W. On-Demand Grid Lines superimposition display (page 5)
Options: C: Not displayed (initial setting)
!: Displayed
At initial setting, On-Demand Grid Lines (page 5) are not displayed in the
viewfinder. However, they can be set to be displayed.
71