Load film, Pull film leader out to red index mark, Load film -19 – Nikon Camera N60 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
3
Load Film
Use a DX-coded film. Film speed
is set automatically (IS025-
5000).
When the camera is turned on,
film is loaded and the camera
back is closed, the film automat
ically advances to the first frame.
3.1
Turn on the main switch, then open the camera back
and insert film.
3.2
• Insert from the bottom of the film cartridge.
Pull film leader out to red index mark.
>
Do not insert the film leader beyond the red index mark.
>
Hold the film cartridge and ensure film is properly positioned with no
slack.
18
Advertising