Note: loading/removing film – Nikon Camera N60 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
0 Check points
z
o
□ Only DX-coded film can be used with this camera. When film other than
DX-coded film is inserted, Q blinks and
E
appears on the LCD panel.
□ Shutter curtains are very thin. Make sure not to touch the shutter
curtains with your finger or film leader.
□ Film load can be confirmed on the LCD panel.
□ When changing film outdoors, avoid direct sunlight.
<
a:
a.
o
o
(0
<
m
3.3
Gently close the camera back until the lock release
snaps closed. Film automatically advances to first
frame.
• When Q and appear on the LCD panel, the film has advanced to the first
frame.
• When Err and Q blink on the LCD panel, film is not properly installed.
Open the camera back again and reload film.
• Film is automatically rewound when the film reaches the end of the roll.
(See page 27.)
• Number of available exposures of the film roll can be checked through the
film cartridge confirmation window.
NOTE: Loading/removing film
Shutter curtains are very thin. Make sure
not to touch the shutter curtains with
your finger or film leader.
19