Nikon F4 - Manual (Page 139)

13 For full-aperture measurement, set exposure compensation
dial to - 1 - 1 .
14 In stop-down measurement, set exposure compensation
dial (or focusing screen exposure compensation dial for
flash photography) to —1.
15 In stop-down measurement, set exposure compensation
dial to -
1
-
1
.
16 Exposure compensation necessary. (See focusing screen’s
instruction sheet.)
17 Exposure compensation necessary for full-aperture
measurement. (See footnote 12 or 13.)
18 Exposure compensation necessary for stop-down measure­
ment. (See footnote 14 or 15.)
• The following Nikkor lenses cannot be used with the
F4s/F4 camera: All 8mm f/8,16mm f/3.5 (No. 272281 -
290000), 28mm f/3.5 (No. 625611 - 999999), 35mm t/1.4
(No. 385001 — 400000), all 55mm f/1.2, all old-type Reflex
1000mm f/6.3, all 21mm f/4, all old-type PC 35mm f/3.5.
• The AF Teleconverter TC-16 (for F3AF) cannot be attached
to the F4s camera.
• To attach an old-type Reflex-Nikkor 500mm f/8 to an F4s
camera, turn the lens’ tripod mounting collar so it faces
the direction opposite the camera’s grip (from the front of
the camera, it should face the right-hand side). To change
the camera/lens assembly from horizontal to vertical
position or vise versa, do not turn the assembly; turn the
tripod head.
87