Controls in detail, Film speed dial, Dx-coded film – Nikon F4 User Manual

Page 38: Controls in detail -78, Film speed dial -29, Using dx-coded film

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

CONTROLS IN DETAIL-------------------------------

FILM SPEED DIAL

The F4 offers two ways to set film speed, depending on film in use.

DX-Coded Film

While pressing the lock release, set the film speed dial to DX,

Camera automatically senses film speed (ISO 25 to 5000) of

installed DX-coded film.

With dial set to DX, use only DX-coded film. If non-DX-coded
film or film with a defective DX code is loaded, or no film is

loaded, lightly pressing the shutter release button causes the
red alert LED to blink, and the shutter locks.

28

Advertising
This manual is related to the following products:

F4S