Reloading a partially exposed film cartridge, Film winding speed to unexposed frame – Canon IXUS Z70 User Manual
Page 51
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Reloading a Partially Exposed Film
Cartridge
Load the film in the same
way as described in
“Loading the Film
Cartridge”. 16)
^The camera automatically
advances the film to the first
unexposed frame.
Film Winding Speed to Unexposed Frame
Film Status
Required Time
Frame 1 exposed, winding to frame 2 Approx. 16 seconds
Frame 39 exposed, winding to frame 40Approx 35 seconds
O
• If there is a TV or other device emitting strong
radio waves, or a strong magnetic field, the camera
may not be able to reload partially exposed film. If
this happens, "0" in the frame counter and
0
on
the LCD panel blinks as a warning. In such a case,
remove the partially exposed film cartridge. Load a
new, unexposed film cartridge instead The new
film cartridge will load normally
• Be careful not to load a partially exposed film
cartridge in a camera that does not support mid
roll film change (such as the Canon ELPH/IXUS).
The camera will set the visual exposure indicator to
“Exposed" and will not load the film. This means
you will not be able to use the remaining
unexposed part of the film
051