Canon AT 1 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
PRELIMINARY PREPARATION
Neckstrap and Case
Slide the scratch prevention ring and
spare battery case which houses a spare
battery onto the Canon AT-1 's neckstrap,
then thread the neckstrap through the rings.
Adjust the neckstrap to a length most suitable
for you.
Firmly attach the case to the camera by
turning the screw on the bottom of the case.
When you wish to take off the top cover of
the soft case, turn the top cover to the
bottom then slide it straight up in the direc
tion of the arrow and pull it out as indicated
in the photo.
Advertising