Unloading film, 0±1 midroll film rewind, Turn the command dial to <qii – Canon EOS 3000 QD User Manual
Page 21: Open the camera back and remove the film, 0u midroll film rewind
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Loading and Unloading Film
Infrared film cannot be used wifh this camera.
The shutter curtains are manufactured with very
high precision. To prevent damage, never touch the
shutter curtains. When loading or unloading film, be
careful not to touch the shutter curtain with your
fingers or the film
Unloading Film
After the film’s last frame is exposed, the camera rewinds the film
automatically.
©
1
When the film rewind ends, only the
<@> icon will be displayed on the LCD
panel. Check that this icon is
displayed, then open the camera back
and unload the film.
0±1 Midroll Film Rewind
To rewind the film before reaching the last frame, follow the steps below.
B
Turn the Command Dial to <Qii>.
Press and hold down the <Qii>
button for at least 1 second.
• The film will start rewinding. When
the film rewind ends, there will be a
shutter-release sound.
Open the camera back and
remove the film.
21