P program ae, Turn the command dial to <p, Press the shutter button halfway to focus – Canon EOS 3000 QD User Manual
Page 36: Check the lcd panel display, Program ae
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
P
Program AE
Like the <0> mode, this is a general-
purpose, picture-taking mode. The
camera automatically sets the shutter
speed and aperture to suit the
subject’s brightness.
Turn the Command Dial to <P>.
I
fiS
8.0
""k
36
Press the shutter button halfway
to focus.
• When focus is achieved, the beeper
will sound and the in-focus indicator
(•) at the lower right will light.
Check the LCD panel display.
• The shutter speed and aperture will
be set automatically and displayed on
the LCD panel and in the viewfinder.
• If the shutter speed and aperture do
not blink, a correct exposure will be
obtained.
• If the shutter speed and aperture
blink, see “Exposure Warnings” on
page 56.