Camera-controlled automatic shooting – Canon EOS 3000 QD User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
This section describes the Command
Dial’s Basic Zone picture-taking modes;
<D>,
<'?►>,
<ik>,
<A>,
and
<^>.
These modes set all the camera settings
automatically. All you do is point the
camera and press the shutter button.
These modes override the camera’s
Main Dial <
¿Si >
and buttons (except
for <<§>>, <!&>, <Qn>, and the shutter
button). This is to prevent spoiled shots
caused by accidental operation of
camera controls.
Camera-Controlled
Automatic Shooting
' If the <4> flash icon blinks in the
viewfinder while you use a Basic
Zone mode, pop up the built-in flash
with your fingers. If you pop up the
built-in flash beforehand, it will fire
automatically under low-light or
backlit conditions.
■ The settings set automatically by
the Basic Zone modes are shown
by the “Feature Availability Table”
on page 34.
23