Canon A35 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Battery Check
Look into the viewfinder while pressing the battery
check button. If the meter needle points within
the battery check zone, the voltage is sufficient. If
the needle points below the check zone, voltage is
not sufficient and the mercury battery must be
replaced. Be sure to replace two batteries of the
same brand at the same time.
• Press the battery check button firmly. The meter
needle may drop to the underexposure mark once
and then pop back up to the battery check zone.
• When the batteries are exhausted, the camera
sets an improper exposure or the shutter button is
automatically locked. Make sure to check the
batteries before photographing.
11